Home > Do it Yourself > DIY CEILING LIGHT FIXTURE

DIY CEILING LIGHT FIXTURE

February 6th, 2009 admin Leave a comment Go to comments




DIY CEILING LIGHT FIXTURE
Is it difficult to install pot lights (recessed lights) in your kitchen if you don’t have attic space above it

My kitchen c.1978. It’s got a light above the sink and another that’s not quite in the middle of the room. If I install the lights, can it be done without wrecking the whole ceiling? Is it something that can be done by a DIY’er? I’ve installed new fixtures before and have basic knowledge of wiring.

can lights are made in a remodel type also. they are very easy to install. the two hardest parts of this are cutting the round holes in without hitting a wood joist and fishing the wire around to all the openings. if you can patch a few minor drywall holes and paint the entire ceiling it looks great when your done.
first use a stud finder and in pencil mark where the studs are located. decide where you want the lights. try to put them in the center between the studs. keep in mind your going to have to get a wire between them so not too far apart. use the template that comes with the remodel type can and mark the ceiling. cut the holes out of the drywall . you now need to fish a wire from your feed to all the holes. install the lights per instructions for the lights. if you have insulation get a recessed light marked IC . if no insulation go with the cheaper light not marked IC . blank off the old lights, paint the ceiling, install the trims on the lights and enjoy.

How to Install Ceiling Light Fixtures : Installing a Light Fixture Box


DIY to the Rescue 503


DIY to the Rescue 503




RAD Cycle Products Ceiling Mount Bike Hoist


RAD Cycle Products Ceiling Mount Bike Hoist


$12.94


There’s no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike – 55 lb. load limit. Please note, you can mount this item as pictured on a 2 x 4 and screw the 2 X 4 to the joist or mount it right to the…

Mr Beams MB530 Motion-Sensor LED Battery Powered Stair Light


Mr Beams MB530 Motion-Sensor LED Battery Powered Stair Light


$16.89


LED Battery Operated Motion Sensor Mr Beams Stair Light…

Dremel 565 Multi Purpose Cutting Kit 565D


Dremel 565 Multi Purpose Cutting Kit 565D


$10.25


The drywall bits allow you to quickly cut drywall for electrical boxes, air vents and other wall features. It’s best to use drywall bits in a clockwise direction. The multipurpose cutting bit prepares an area for light fixtures and ceiling fans and makes cut-outs in cabinets, paneling and fiberglass. Includes: a cutting guide attachment; two drywall cutting bits; and one multipurpose bit….


  1. No comments yet.
  1. No trackbacks yet.