DIY PCB
DIY UV lamp for PCB exposure
|
|
Dremel 220-01 Rotary Tool Work Station $32.99 Turn that Dremel rotary tool into a drill press with this rotary tool workstation from Dremel. The station accepts several Dremel models to drill perpendicular and angled holes in 15-degree increments from 90 degrees vertical to 90 degrees horizontal. Inch and metric markings on the base make for accurate drilling of workpieces. Depth markings with depth stop provide consistent depth adjustment, w… |
|
|
PanaVise 315 Circuit Board Holder $30.99 Model 315: Crossbar holds PC boards from 1/8″ to 12″. A second set of “V” grooves is positioned laterally near the tip of the 6″ arms…. |
|
|
Milescraft 1097 Tool Stand Drill Press for Rotary Tools $30.97 The Milescraft 1097 is a Tool Stand Drill Press for Rotary Tools. Rack and pinion gearing allows smooth controlled plunge. Scale with depth stop allows depth control and precise repeatability. Sturdy cast aluminum base provides sturdy work area. Stong 13.5 inch metal tube allows drilling of objects up to 5 inches in height. Lock rotary tool in horizontal position for hands free sanding or polishin… |
|
|
Scythe 80mm 2000rpm Kama-Flex fan (SA0825FDB12L) $6.49 Tuned by Scythe to Make it Affordable! Equipped with “Fluid Dynamic Bearing” also known as C.O.S.C (Closed Oil Shaft Carrier), Long Life, Silent, and High Performance!… |
|
|
Scythe KAMA FLEX 80 mm / 1,500 rpm Silent Case Fan $12.00 Tuned by Scythe to Make it Affordable! Equipped with “Fluid Dynamic Bearing” also known as C.O.S.C (Closed Oil Shaft Carrier), Long Life, Silent, and High Performance!… |
|
|
AM/FM Radio Kit/Trainer (requires assembly-advanced) $27.38 **Receives standard AM and FM broadcast frequencies. — **Includes 1 integrated circuit, 9 transistors and 4 diodes. — The unique design of this excellent radio kit allows you, during assembly, to place each part over its corresponding symbol in the schematic drawing printed on the surface of the circuit board. This technique maximizes the learning process while reducing the chance for errors d… |
|
|
KD Tools 2524 Short Circuit Detector $23.00 Locates short circuits in 6 and 12 Volt systems right through upholstery, body panels and metal door posts Works on all 12 volt systems Easy-to-read meter It’s simple to use, connect tester across burned out fuse. Then move the meter along the wire routing. The meter needle will oscillate until the short is found…. |
Categories: Do it Yourself diy, diy pcb, diy pcb etching, diy pcb fabrication, diy pcb kit, diy pcb router, electronics, hardware, howto, pcb