DIY

Save Money With DIY Laminate Flooring

Laminate flooring has come a long way in the last five years. There are more varieties, colors and grades than you can imagine. Not only is it more reasonable than hardwood, but it’s so easy to install that the average do-it-yourselfer can take it on. The result is a high quality floor that looks almost like wood, and if installed correctly, supports a hefty warranty period. Some brands warranty their laminates for over 25 years.

Here are the steps for installing the Torlys Quick-Step flooring and some of the details you need to be aware of that apply to most laminate flooring.

Place the boxes of flooring in your home and allow 24 to 48 hours to climatize before installation. If installing in a new home, you may want to run a dehumidifier for one week prior to installation. The humidity should be approximately 40 to 60 percent.

Thoroughly clean and level the sub floor using self-leveling concrete for anything more than 1/12″ per 39 1/2″.

The flooring basically floats, but it requires a 3/8″ expansion gap around the outside of the room or any fixed objects. If your baseboard will not cover the gap you can either add quarter round trim or undercut the drywall and slide the laminate under the wall.

When laying over concrete floor, it’s important to determine whether you have a moisture problem. Tape pieces of clear polyethylene plastic in several places on the floor, leave for 24 hours and check whether condensation has formed. Any extensive water build-up or leakage need to be fixed before laying the floor.

Before placing the laminate, start with a 2-mm layer of underlay of antimicrobial foam with attached self-sealing moisture barrier which provides sound absorption and warmth. The underlay is placed in the same direction as the planks. Generally, these are run parallel to the flow of natural light or to the longest wall.

Overlap the underlay about 4″ up the wall to create a vapour barrier. In doorways or cut ends, seal with damp-proof or tuck tape. When attaching one row to another, pull back the foam, removing tape on adhesive strip and replace foam to form a continuous vapour barrier.

Lay down a test row of laminate planks, ensuring the last plank will not be less than 8″. For the first row, begin in the corner and move left to right keeping the groove in front of you. This small step will make the rest of your job easier.

When you’re ready to begin, open several boxes and choose packs randomly from different packs, inspecting each before laying.

Saw off the tongue off the long side of the first row of planks (and the short side of the corner board), so they will fit nicely against the outer edge and create the 3/8″ expansion gap. Don’t cut your last plank until all the pieces in the first row are clicked in place.

Uses the wedges provided by the manufacturer to create your expansion gap for the outer perimeter. When starting the second row, it should be smaller than the first piece you used in the previous row, but no less than 8″. This will stagger the joints as you go along. Click the board into place by angling it slightly, insert tongue into groove, and rock it into place. Click in a scrap at the joints to keep both planks level, and using the tapping block, lightly tap into place.

When installing the last plank in the row, use the board puller to securely attach the plank.

Apply molding to finish off the edges in the doorway, still allowing for an expansion gap. Use T-molding to transition between two types of flooring and snap into place.

Supplies:

laminate flooring
foam underlay
tuck tape
utility knife
table saw
wedges (provided by manufacturer)
tapping block (provided by manufacturer)
board puller (provided by manufacturer)

About the Author

Get all the facts about McKinney TX real estate. Locate your dream home in Lucas quickly and easily.

Mouse-a-Sketch

Wilton Trim-N-Turn Ultra Rotating Cake Stand $12.99 Trim n turn ultra cake turntable-12 round. Wilton-trim n turn ultra. The trim n turn ultra is a mid level turn-table with a locking mechanism. Soft grip bottom and center ring for complete control. The 12in platform separates from the base for quic……

STAINLESS steel LAZY Susan 2 tier TURNTABLE Kitchen $24.95 Made of durable stainless steel, the attractive two-tier turntable has a variety of uses. Makes it easy to organize and access spices, condiments, canned food, and a host of other items….

Ateco 12 Metal Revolving Cake Stand $46.00 Ateco 12″ metal revolving cake standuse this ateco cake stand to display or decorate cakes. the base is “powder coated” cast iron and the top is 1/8″ aluminum. this stand comes with a non-slip pad to hold it in place. material: aluminum diameter: 12″ height: 5″ s/s ball bearings for smooth rotation non-slip pad included weight: 6.5 lbs. made in usa model #: 612 293501…

How to Make Rustic Garden Furniture [VHS] $19.95 …

Dremel 220-01 Rotary Tool Work Station $32.99 Turn that Dremel rotary tool into a drill press with this rotary tool workstation from Dremel. The station accepts several Dremel models to drill perpendicular and angled holes in 15-degree increments from 90 degrees vertical to 90 degrees horizontal. Inch and metric markings on the base make for accurate drilling of workpieces. Depth markings with depth stop provide consistent depth adjustment, w…

2×4basics 90164 Workbench and Shelving Storage System $69.99 Create a work and storage space that truly fits your needs with Blitz’s 2×4basics Workbench Assembly Kit. This innovative, do-it-yourself system lets you easily assemble a custom workbench in less than an hour. All you need is some plywood and 2×4s and you’ll have a work bench that will meet all your project and storage requirements.Use the included bonus ShelfLinks Kitto add shelving to the top o…

Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack $118.00 The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage without the need for a ladder. It helps to free up valuable floor space in your garage or storage area and allows you to store heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and more. The heavy-duty 4-by-4-foot platform is built to last and provides 16 square f…